Jensen Tools Mobile Receiver User Manual

CDX6311

3

You can make all these 
connections without even being 
in the vehicle.

1.

Splice or crimp wires.

2.

Attach wiring adapter to the 
car wiring harness.

Wiring Diagram / Color Codes
1.

Power Antenna (dark blue 
wire) - Connect to the power 
antenna or a amplifier. If not 
used, tape the bare end of 
wire.

2.

Ground (black wire) - 
Connect to the ground 
terminal or a clean, 
unpainted part of the 
chassis.

3.

Memory/Battery (yellow 
wire) - Connect to the 
battery or to a 12 volt power 
source that is always alive. 
The radio will not work if this 
wire is not connected.

4.

Accessory/Ignition (red wire) 
- Connect to the existing 
radio wire or radio fuse.

5.

Left front speaker

6.

Right front speaker

7.

Left rear spearker

8.

Right rear speaker

9.

RCA Outputs to Amplifier

10. Auxiliary Input Cable 

(yellow)

11.

Antenna

12. XM

®

 Direct Connect Cable

13. XM

®

 Audio Input (black RCA)

14. CD Changer/JPORT connector - Use this 8-pin DIN socket to connect an optional CD 

Changer or JPORT (sold separately).

*TERK XMDJEN100 cables sold separately.

**TERK XMD1000 Direct Tuner and antenna sold separately.