Kenwood RC-D10 User Manual

2

n

1  Clean and dry the installation location.

Do not install the bracket close to an air bag.

2  Remove the release paper from the base 

of the panel bracket, then secure it in 

place using the 3 supplied self-tapping 

screws.

•  Allow the panel to set for a while, to ensure 

it remains fast.  Otherwise, vibrations may 

occur.

•  After removing the release paper, it cannot 

be reused.

3  Attach the panel holder to the panel 

bracket using the 2 supplied SEMS 

screws.

4  Attach the RC-D70 to the panel holder 

so that it locks in place.

SEMS screw

(M4 x 0 mm)

Panel holder

Tapping screw

(4 mm x 2 mm)

Flat washer

Adhesive tape

Panel 

bracket

n

1  Attach the panel holder to the base 

stand using the 2 supplied SEMS 

screws.

2  Attach the RC-D70 to the panel 

holder so that it locks in place.

SEMS screw (M4 

x 0 mm)

Panel holder

Base stand