Kenwood TM-733E User Manual

9 MCP-2A Memory Control Program (for use with TM-V71A/E, TM-D710A/E, RC-D710)

76

TM-D710A/E

It is possible to read a file that was exported from TravelPlus for Repeaters sold by ARRL.  A file 
from TravelPlus for Repeaters has a different file extension and format depending on the year it 
was created.  MCP-2A requires the “tpe” extension (2005-2006 edition; version 9.0).  But if it is 
acceptable to you to be able to read only a portion of the file, then the file can be read if a .csv 
extension is applied.  Refer to the MCP-2A Help file for details of how to read this type of file.

Note: The method of storing the On/ Off status and frequency for Tone/CTCSS was modified at the time of MCP-2A, Version 

3.00.
•

In the case that “100.0” is displayed in the CTCSS column in the file:

Up to Version 2.01: Turn CTCSS On and configure CTCSS frequency for “100.0 Hz”.

Version 3.00 and later: Turn Tone On and configure Tone frequency for “100.0 Hz”.

•

In the case that “67.0/100.0” is displayed in the CTCSS column in the file:

Up to Version 2.01: CTCSS status and CTCSS frequency are set at initial values.

Version 3.00 and later: Turn Tone On and configure Tone frequency for “67.0 Hz”.

It is possible to import a file that was created using Kenwood .hmk format.

It is possible to export a file that was created using Kenwood .hmk format.  Refer to the MCP-2A 
Help file for details as to how to use a .hmk file that was imported as explained in Section 9.4 
Importing .hmk Files Created by Another MCP-2A.

It is possible to export a file with .html format.  

You can switch the Splash window On or Off while you are operating.

Note: You can cancel the Splash window temporarily by double-clicking it while it is visible.