Manualsbrain.com
  1. Manuals
  2. Brands
  3. Kenwood
  4. KDC-X996
  5. User Manual

Kenwood KDC-X996 User Manual

Download
Page of 45
43
   
|
   
KDC-X996/ KDC-BT952HD
English
   
|
   
44
Clock and Other Functions
Theft Deterrent Faceplate
The faceplate of the unit can be detached and 
taken with you, helping to deter theft.
Removing the Faceplate
1 
Press the Release button.
Drop open the faceplate.
2 
Drawing the faceplate to left side pull it to 
forward and remove it.
¤
•  The faceplate is a precision piece of equipment and can
be damaged by shocks or jolts. 
•  Keep the faceplate in its faceplate case while detached.
•  Do not expose the faceplate (and the faceplate case) to
direct sunlight or excessive heat or humidity. Also avoid 
places with too much dust or the possibility of water 
splashing.
Reattaching the Faceplate
1 
Align the shaft on the unit with the depression 
on the faceplate.
2 
Push the faceplate in until it clicks.
The faceplate is locked in place, allowing you to 
use the unit.
Initial Settings
You can select following Initial Setting items.
1 
Select the Standby
Pressing the [SRC] button repeatedly switches 
source.
Select the “STANDBY” display.
 
✍
SRC Select mode 2: Press the [SRC] button and 
then turn the [VOL] knob. To determine the 
selected source, press the [VOL] knob.
2 
Enter Menu List mode
Press the [MENU] button.
3 
Enter Initial Setting mode
Turn the [VOL] knob and press it when the 
desired item is displayed. 
Select “Initial Settings”.
4 
Select the setting item to adjust
Turn the [VOL] knob. 
Display
Overview
“Initial Settings”
“SRC Select”
Sets the source selection method.
“Settings 1”/ “2”
“Beep”
Setting the operation check sound (beep sound) 
ON/OFF.
“OFF”/ “ON”
“Menu Language” You can select the display language for the 
Menu list item.
“English”/ “Français”/ “Español”
“Pandora Source” When this is set to ON, Pandora source can be 
selected.
“ON”: Allows you to select Pandora source by 
connecting an iPhone, iPod touch, Android or 
BlackBerry (with the Pandora® internet radio 
application).
“OFF”: Disable Pandora source selection. 
“Built in AUX”
  When this is set to ON, AUX source can be 
selected.
“ON”: Allows AUX source to be selected. Use 
this setting when the built-in AUX terminal 
is connected to the external equipment all 
the time.
“OFF”: Disable AUX source selection. Use this 
setting when the built-in AUX terminal is 
not used.
“Forced CD-DA”
Sets the method for reading CD.
“Settings 1”: Automatically distinguishes 
between audio file disc and music CD when 
playing disc.
“Settings 2”: Forces playing as music CD.
“Built in AMP”
Selecting “OFF” turns off the built-in amplifier. 
Turning off the built-in amplifier improves the 
quality of the sound from Preout.
“OFF”/ “ON”
“DSI”
DSI (Disabled System Indicator) of the unit blinks 
when the faceplate is removed.
“OFF”/ “ON”
“F/W Update”
Updates the firmware. The update information 
will be posted on the following URL as 
necessary.
www.kenwood.com/cs/ce/
(      : Factory setting)
5 
Make a setting
Turn the [VOL] knob to select a setting value, 
and then press the [VOL] knob. 
6 
Exit Menu List mode
Press the [MENU] button for at least 1 second, 
and then press it again briefly.
Demonstration mode Setting
Turning the demonstration mode ON/OFF.
1 
Enter Menu List mode
Press the [MENU] button.
2 
Enter Demonstration mode setting
Turn the [VOL] knob and press it when the 
desired item is displayed. 
Select “DEMO Mode”.
3 
Set the Demonstration mode
Turn the [VOL] knob and press it when the 
desired item is displayed. 
Select “ON” or “OFF”.
4 
Exit Menu List mode
Press the [MENU] button.