Philips CED1900BT User Manual

English

Mount into the dashboard

Note

•

Make sure that wires are correctly connected before

you mount the main unit into a car.

•

If preset radio stations are lost when the ignition key

is turned OFF and then back ON, reconnect the red

leads crosswise to the yellow ones.

If the car does not have an on-board drive

or navigation computer, disconnect the

negative terminal of the car battery.

• If you disconnect the car battery in

a car that has an on-board drive or

navigation computer, the computer

may lose its memory.

• If the car battery is not disconnected,

to avoid short-circuit, make sure that

bare wires do not touch each other.

Make sure that the car dashboard opening

is within these measurements:

• Since the unit cannot be used if the

dashboard opening's slant angle is

above 20 degrees, make sure that the

horizontal slant of the car dashboard

opening is between 0 and 20 degrees.

182 mm

112 mm

5 mm

Slide the unit into the dashboard until a

click sound is heard.

Reconnect the negative terminal of the car

battery.