Philips CED1900BT User Manual
42 EN
The disc does not play.
• The disc is upside down. Make sure that
the printed side is upwards.
• The disc is dirty. Clean the disc with a
clean, soft, lint-free cloth. Wipe the disc
outwards from the center.
• The disc is defective. Try another disc.
• The disc is incompatible. Try another disc.
• The recordable disc is not finalized.
• The region code of DVD disc is not
supported. Use a disc with proper region
code.
Cannot play DivX file from an SD/SDHC card
or USB storage device
• DivX DRM protected files cannot be
played if they are saved on an SD/SDHC
card or USB storage device. Transfer it to a
compatible disc instead.
No image
• Parking wire connection is incorrect. Check
the wiring.
No image on rear monitor
monitors (see 'Use rear monitors' on page
• A DivX video can be played for front
passengers only.
Image flashes or is distorted.
• Video connection is improper. Check the
connections.
Noise in broadcasts
• Signals are too weak. Select another station
with stronger signals.
• Check the connection of the car antenna.
Preset stations are lost.
• Battery cable is not correctly connected.
Connect the battery cable to the terminal
that is always live.
The fuse is broken.
• The fuse type is incorrect. Replace it with
a 15 A fuse.
• Speaker wire or power wire is grounded.
Check the connections.
About the Bluetooth device
Music playback is unavailable on the system
even after successful Bluetooth connection.
• The device cannot be used with the
system to play music.
The audio quality is poor after connection
with a Bluetooth-enabled device.
• The Bluetooth reception is poor. Move
the device closer to the system or remove
any obstacle between the device and the
system.
Cannot connect with the system.
• The device does not support the profiles
required for the system.
• The Bluetooth function of the device is
not enabled. Refer to the user manual of
the device to find out how to enable the
function.
• The system is not in the pairing mode.
• The system is already connected with
another Bluetooth-enabled device.
Disconnect that device or all other
connected devices and then try again.
The paired mobile phone connects and
disconnects constantly.
• The Bluetooth reception is poor. Move
the mobile phone closer to the system or
remove any obstacle between the mobile
phone and the system.
• Some mobile phones may connect and
disconnect constantly when you make
or end calls. This does not indicate any
malfunction of the system.
• For some mobile phones, the Bluetooth
connection may be deactivated
automatically as a power-saving feature.
This does not indicate any malfunction of
the system.