Philips CED1900BT User Manual

Page of 47
7
English
EN
 /   /PRESET +/PRESET -
•  Tune to the previous or next preset 
radio station.
•  Skip to the previous or next folder.
•  Press to turn on the system.
•  Press and hold to turn off the system.
•  Press to mute the speakers or release 
them from mute status.
NAVI
•  Press to access the navigation system.
3  Install the car 
entertainment 
system
Always follow the instructions in this chapter in 
sequence.
These instructions are for a typical installation. 
However, if your car has different requirements, 
make the adjustment accordingly. If you have 
any question regarding installation kits, consult 
your local retailer.
Note
 
This system is designed for negative ground (earth) 12V 
DC operation only.
 
Always install this system in the car dashboard. Other 
locations can be dangerous as the rear of the system 
heats up during use.
 
To avoid short-circuit: before you connect, make sure 
that the ignition is off.
 
Make sure that you connect the yellow and red power 
supply leads after all other leads are connected.
 
Make sure that all loose leads are insulated with 
electrical tape.
 
Make sure that the leads do not get caught under 
screws iron parts that will move (e.g. seat rail).
 
Make sure that all ground (earth) leads are run to a 
common ground (earth) point.
 
Use only the supplied mounting hardware for a safe 
and secure installation.
 
Improper fuses can cause damage or fire. When you 
need to change the fuse, consult a professional.
 
When you connect other devices to this system, make 
sure that the rating of the car circuit is higher than the 
total fuse value of all the connected devices.
 
Never connect speaker wires to the metal body or 
chassis of the car.
 
Never connect speaker wires with stripes to one 
another.