Sanyo ECD-T1535 User Manual

7

The adjustment mode will change in the following order:

By pressing VOL button + (11) or VOL button – (12), it is possible to adjust the 
desired sound level.

Press BND/LOU button (13) for several seconds to reinforce the bass output and 
display will show “LOUD”.  Press it for several seconds again to release this function.

Press the DSP button (15), the clock is shown on the LCD display.  Then hold down
the button until the clock flashes. Then press the MANU/SKIP 

 button (17) to

change hours or MANU/SKIP button 

 (16) to change minutes.

Press MOD button (6) shortly to choose desired listening mode.
[e.g.  radio mode to CD mode to AUX mode]

Press MUT button (3) to mute the sound instantly.  If any button is pressed in the 
mute state, the mute mode is released.

Exhibit current frequency and activated functions on the display (8).

Press EQ button (19) to turn on equalization function and to select desired audio 
mode.  There are five kinds of mode as below:

The unit can be connected to a portable audio player through the AUX IN jack (24).
To hear the input signal, press MOD (6) button several times until the display shows 
“AUX”.

If the front panel is not installed in the main unit, the LED (25) will be flashing.

RESET button (26) can be activated with either a ball point pen or thin metal 
object.  RESET button (26) is to be activated for the following reasons:
-  Initial installation of the unit when all wiring is completed.
-  All the function buttons do not operate.
-  Error symbol on the display.

FLAT

CLASSICS

POP M

ROCK M

DSP OFF

Volume

Bass

Treble

Balance

Fader