Roadmaster VR500CS-BT User Manual

Installation using the screw holes on both sides of the unit.

1. Screw holes on the side of the unit.

2.  Screws.  Use  either  truss  screws  (5  x 
8mm) or flush surface screws (4 x 8mm), 
depending  on  the  shape  of  the  screw 
holes in the bracket. 

3. Vehicle’s Factory Mounting Bracket

4. Dashboard or Console

5. Hook (Remove this part)

Note:  The  mounting  sleeve,  outer  trim 
ring, and the mounting strap are not used 
for this method of installation.

6

2 Keys
1 Hex Nut
1 Mounting Sleeve (not shown)
2 Lock Washers
1 Sheet Metal Screw
1 Metal Support Strap

2 Flat Washers
1 Mounting Bolt
1 Faceplate Case (not shown)
1 1/8" Stereo Cable
1 Remote Control
1 External Microphone