Sony XR-F5005 User Manual
22
XR-F5100/F5005
3-262-940-21 (1)
01GB02CAS-E.fm
masterpage:Left
Locating a disc by name
— List-up (When connecting a CD unit with
the CD TEXT/CUSTOM FILE function, or an MD
unit)
the CD TEXT/CUSTOM FILE function, or an MD
unit)
You can use this function for discs that have been
assigned custom names*
assigned custom names*
1
or for CD TEXT
discs*
2
.
*1
Locating a disc by its custom name: when you
assign a name for a CD (page 21) or an MD.
assign a name for a CD (page 21) or an MD.
*2
Locating discs by the CD TEXT information: when
you play a CD TEXT disc on a CD unit with the CD
TEXT function.
you play a CD TEXT disc on a CD unit with the CD
TEXT function.
1
During playback, press
(LIST)
.
The name assigned to the current disc appears
in the display.
in the display.
2
Press
(LIST)
repeatedly until you find
the desired disc.
3
Press
(SEEK)
(+) or
(SEEK)
(–) to play
the disc.
Notes
• Once a disc name has been displayed for 5
• Once a disc name has been displayed for 5
seconds, the display goes back to its normal
playback mode.
playback mode.
• If there are no discs in the magazine, “NO DISC”
appears in the display.
• If a disc has not been assigned a custom file, “NO
NAME” appears in the display.
• The information appears only in upper case. There
are also some letters which cannot be displayed.
Additional Information
Maintenance
Fuse replacement
When replacing the fuse, be sure to use one
matching the amperage rating stated on the
original fuse. If the fuse blows, check the power
connection and replace the fuse. If the fuse blows
again after replacement, there may be an internal
malfunction. In such a case, consult your nearest
Sony dealer.
matching the amperage rating stated on the
original fuse. If the fuse blows, check the power
connection and replace the fuse. If the fuse blows
again after replacement, there may be an internal
malfunction. In such a case, consult your nearest
Sony dealer.
Warning
Never use a fuse with an amperage rating
exceeding the one supplied with the unit as this
could damage the unit.
exceeding the one supplied with the unit as this
could damage the unit.
Cleaning the connectors
The unit may not function properly if the
connectors between the unit and the front panel
are not clean. In order to prevent this, detach the
front panel (page 8) and clean the connectors
with a cotton swab dipped in alcohol. Do not
apply too much force. Otherwise, the connectors
may be damaged.
connectors between the unit and the front panel
are not clean. In order to prevent this, detach the
front panel (page 8) and clean the connectors
with a cotton swab dipped in alcohol. Do not
apply too much force. Otherwise, the connectors
may be damaged.
Fuse (10 A)
Main unit
Back of the front panel