Sony CDX-GT50W Manual

You can adjust the balance, fader, and subwoofer 
volume.

Press the select button repeatedly 
until “Balance,” “Fader” or “Sub 
Woofer” appears.
The item changes as follows:

equalizer setting*

1

 

t 

Balance (left-right) 

t 

Fader (rear-front) 

t 

Sub Woofer (subwoofer volume)*

2

 

t 

AUX Level*

3

*1 When EQ3 is activated (page 9).
*2 “– 

∞” is displayed at the lowest setting, and can 

*3 When AUX source is activated (page 11).

Rotate the volume control dial to 
adjust the selected item.
After 3 seconds, the setting is complete and 
the display returns to normal play/reception 
mode.

<, M, , 

m.

“Custom” of EQ3 allows you to make your own 
equalizer settings.

Select a source, then press (EQ3) 
repeatedly to select “Custom.”

Rotate the volume control dial to 
select the desired frequency.
LOW Frequency can be set to 60 Hz or 100 
Hz.

Rotate the volume control dial to 
adjust the volume level.
The volume level is adjustable in 1 dB steps, 
from –10 dB to +10 dB.

Push the select button.
Repeat steps 3 to 6 to adjust “MID” and 
“HIGH.”
MID and HIGH frequencies differ but are set 
in the same way (MID: 500 Hz or 1.0 
kHz; HIGH: 10.0 kHz or 12.5 kHz).

To restore the factory-set equalizer curve, 
press and hold the select button before the 
setting is complete.
After 3 seconds, the setting is complete and 
the display returns to normal play/reception 
mode.

<, 

M, , or m.

Press and hold the select button.
The setup display appears.

Press and hold the select button.
The setup is complete and the display returns 
to normal play/reception mode.

< or ,.

t