Sony Wrr-862B User Manual
12
(GB)
Error Messages
Backlight mode
Selecting the Backlight Mode
You can select the backlight mode of the display.
1
Press the MODE button until the backlight mode appears.
2
Press the SET button.
The backlight indication starts flashing.
The backlight indication starts flashing.
3
Press the + or – button to select the desired mode.
BL OFF : Lights off all the time
BL ON : Lights on all the time
BL AT : Lights on when you begin to operate the
BL ON : Lights on all the time
BL AT : Lights on when you begin to operate the
tuner. Turns off automatically 15 seconds
after you finish operation.
after you finish operation.
4
When the desired mode appears, press the SET button.
The display stops flashing and the selected mode is now
stored in memory.
The display stops flashing and the selected mode is now
stored in memory.
When a problem occurs, one of the following error message
may appear on the display.
may appear on the display.
Messages
ERROR 03
ERROR 11
ERROR 21
ERROR 51
Contents
The battery voltage
exceeds the allowable
value.
An error occurred in
backup memory data.
The PLL synthesized
circuit is in trouble.
Defect of the A/D
converter.
Measures
Use the specified
batteries.
Contact your Sony
dealer.
Settings