Sony XR-1800R User Manual
EN
5
B
Reset button
A
(RELEASE)
Attaching the Front Panel
Apply the right side of the front panel to the
unit by attaching part A of the front panel to
part B of the unit as illustrated, then swing
the left side into the unit until it clicks.
unit by attaching part A of the front panel to
part B of the unit as illustrated, then swing
the left side into the unit until it clicks.
Notes
• Make sure that the front panel is the right way
• Make sure that the front panel is the right way
up when attaching it to the unit as it cannot be
attached upside down.
attached upside down.
• Do not press the front panel hard against the
unit when attaching it to the unit. It can easily
be attached by pressing it lightly against the
unit.
be attached by pressing it lightly against the
unit.
• Do not press hard or give excessive pressure to
the display windows of the front panel.
• Before removing the front panel, be sure to turn
the power off. However, if you press (RELEASE)
to detach the panel while the unit is still turned
on, the power will be automatically turned off in
order to protect the speakers from being
damaged.
to detach the panel while the unit is still turned
on, the power will be automatically turned off in
order to protect the speakers from being
damaged.
• Do not expose the front panel to direct sunlight,
heat sources such as hot air ducts or leave it in a
humid place. Never leave it on the dashboard
etc. of a car parked in direct sunlight where
there may be a considerable rise in temperature
inside the car.
humid place. Never leave it on the dashboard
etc. of a car parked in direct sunlight where
there may be a considerable rise in temperature
inside the car.
Caution alarm
If you turn the ignition key to the OFF position
without removing the front panel, the caution
alarm will be activated and a beep tone will be
heard for a few seconds.
without removing the front panel, the caution
alarm will be activated and a beep tone will be
heard for a few seconds.
Getting Started
Resetting the unit
Before operating the unit for the first time or
after replacing the car battery, you must reset
the unit.
Press the reset button with a pointed object,
such as a ballpoint pen.
after replacing the car battery, you must reset
the unit.
Press the reset button with a pointed object,
such as a ballpoint pen.
Note
Pressing the reset button will erase all the
memorized programme and memory functions.
Pressing the reset button will erase all the
memorized programme and memory functions.
Detaching the front panel
The front panel of this unit can be detached in
order to prevent the unit from being stolen.
order to prevent the unit from being stolen.
1
Press (OFF).
2
Press (RELEASE) to open up the front
panel. Then slide the front panel a little
to the left, and pull it off towards you.
panel. Then slide the front panel a little
to the left, and pull it off towards you.
Be sure not to drop the panel after detaching it
from the unit.
from the unit.
Getting Started