Sony MEXBT3900U Manual
21
Searching a track by listening
to track passages — ZAPPIN™
to track passages — ZAPPIN™
While playing short track passages in a CD or
USB device in sequence, you can search for a
track you want to listen to.
ZAPPIN mode is suitable for searching for a
track in shuffle or shuffle repeat mode.
USB device in sequence, you can search for a
track you want to listen to.
ZAPPIN mode is suitable for searching for a
track in shuffle or shuffle repeat mode.
1
Press (5) (MIC/ZAP) during playback.
After “ZAPPIN” appears in the display,
playback starts from a passage of the next
track.
The passage is played for the set time, then a
click sounds and the next passage starts.
After “ZAPPIN” appears in the display,
playback starts from a passage of the next
track.
The passage is played for the set time, then a
click sounds and the next passage starts.
2
Press the select button or (5) (MIC/
ZAP) when a track you want to listen
to is played.
The track that you select returns to normal
play mode from the beginning.
To search a track by ZAPPIN mode again,
repeat steps 1 and 2.
ZAP) when a track you want to listen
to is played.
The track that you select returns to normal
play mode from the beginning.
To search a track by ZAPPIN mode again,
repeat steps 1 and 2.
Tips
• You can select the playback time from about 6
• You can select the playback time from about 6
seconds/15 seconds/30 seconds (page 30). You
cannot select the passage of the track to play.
cannot select the passage of the track to play.
• Press (SEEK) +/– or (3)/(4) (ALBUM –/+) in
ZAPPIN mode to skip a track or album.
• Pressing
(BACK) also confirms a track to
playback.
Bluetooth (Handsfree calling
and Music streaming)
and Music streaming)
Bluetooth operations
To use the Bluetooth function, the following
procedure is necessary.
procedure is necessary.
1
Pairing
When connecting Bluetooth devices for the
first time, mutual registration is required. This
is called “pairing.” Registration is required
only for the first time, as this unit and the
other devices will recognize each other
automatically thereafter. You can pair up to 9
devices. (Depending on the device, you may
need to input a passkey for each connection.)
When connecting Bluetooth devices for the
first time, mutual registration is required. This
is called “pairing.” Registration is required
only for the first time, as this unit and the
other devices will recognize each other
automatically thereafter. You can pair up to 9
devices. (Depending on the device, you may
need to input a passkey for each connection.)
2
Connection
To use the device after pairing is made, start
the connection. Sometimes pairing allows for
connection automatically.
To use the device after pairing is made, start
the connection. Sometimes pairing allows for
connection automatically.
3
Handsfree calling/Music streaming
You can talk handsfree and listen to music
when the connection is made.
You can talk handsfree and listen to music
when the connection is made.
Pairing
First, register (pair) a Bluetooth device (cellular
phone, etc.) with this unit. You can pair up to 9
devices. Once pairing is established, there is no
need for pairing again.
phone, etc.) with this unit. You can pair up to 9
devices. Once pairing is established, there is no
need for pairing again.
1
Place the Bluetooth device within 1 m
(3 ft) of this unit.
(3 ft) of this unit.
2
Press and hold (BT) until “
” flashes
(more than 2 seconds).
The unit enters pairing standby mode.
The unit enters pairing standby mode.
The part of each track to
play in ZAPPIN mode.
play in ZAPPIN mode.
Track
(5) pressed.
continue to next page
t
Support site
http://esupport.sony.com
http://www.sony.com/mobileAV
http://www.sony.com/mobileAV
flashing