Sony XR-C2604J User Manual
9
Memorizing only the
desired stations
desired stations
You can preset up to 18 FM stations (6 each for
FM1, 2, and 3), up to 6 MW stations, and up to
12 SW stations (6 each for SW1 and 2) in the
order of your choice.
FM1, 2, and 3), up to 6 MW stations, and up to
12 SW stations (6 each for SW1 and 2) in the
order of your choice.
1
Press (SOURCE) repeatedly to select the
tuner.
tuner.
2
Press (MODE) repeatedly to select the
band.
band.
3
Press either side of (SEEK/AMS) to tune
in the station that you want to store on
the number button.
in the station that you want to store on
the number button.
4
Press and hold the desired number
button ((1) to (6)) until “MEM” appears.
The number button indication appears in
the display.
button ((1) to (6)) until “MEM” appears.
The number button indication appears in
the display.
Note
If you store a new station on a number button
which already has a station registered, the
previously stored station will be replaced by the
new station.
If you store a new station on a number button
which already has a station registered, the
previously stored station will be replaced by the
new station.
Receiving the memorized
stations
stations
1
Press (SOURCE) repeatedly to select the
tuner.
tuner.
2
Press (MODE) repeatedly to select the
band.
band.
3
Press the number button ((1) to (6)) on
which the desired station is stored.
which the desired station is stored.
Tip
Press either side of (PRST/DISC) to receive the
stations in the order they are stored in the
memory (Preset Search Function).
Press either side of (PRST/DISC) to receive the
stations in the order they are stored in the
memory (Preset Search Function).
If you cannot tune in a preset
station
station
Press either side of (SEEK/AMS) to search
for the station (automatic tuning).
Scanning stops when the unit receives a
station. Press either side of (SEEK/AMS)
repeatedly until the desired station is
received.
for the station (automatic tuning).
Scanning stops when the unit receives a
station. Press either side of (SEEK/AMS)
repeatedly until the desired station is
received.
Note
If the automatic tuning stops too frequently, press
(MENU), then press either side of (PRST/DISC)
repeatedly until “LOCAL” (local seek mode) is
displayed. Then press + side of (SEEK/AMS) to
select “LOCAL-ON.” Press (ENTER).
Only the stations with relatively strong signals will
be tuned in.
If the automatic tuning stops too frequently, press
(MENU), then press either side of (PRST/DISC)
repeatedly until “LOCAL” (local seek mode) is
displayed. Then press + side of (SEEK/AMS) to
select “LOCAL-ON.” Press (ENTER).
Only the stations with relatively strong signals will
be tuned in.
Tip
If you know the frequency of the station you want
to listen to, Press and hold either side of
(SEEK/AMS) until the desired frequency appears
(manual tuning).
If you know the frequency of the station you want
to listen to, Press and hold either side of
(SEEK/AMS) until the desired frequency appears
(manual tuning).
If FM stereo reception is poor
— Monaural Mode
— Monaural Mode
1
During radio reception, press (MENU),
then press either side of (PRST/DISC)
repeatedly until “MONO” appears.
then press either side of (PRST/DISC)
repeatedly until “MONO” appears.
2
Press either side of (SEEK/AMS)
repeatedly until “MONO-ON“ appears.
The sound improves, but becomes
monaural (“ST” disappears).
repeatedly until “MONO-ON“ appears.
The sound improves, but becomes
monaural (“ST” disappears).
3
Press (ENTER).
To return to stereo mode, select “MONO-OFF”
in step 2 above.
in step 2 above.