Sony XR-C6100R User Manual

The rotary commander works by pressing
buttons and/or rotating controls.
You can control the optional CD/MD unit by
the rotary commander.

By pressing buttons (the SOURCE
and the MODE buttons)

Every time you press (SOURCE), the
source changes as follows:

TAPE n TUNER n CD n MD

Pressing (MODE) changes the operation in the
following ways:
• the tape transport.
• the band, FM1 n FM2 n FM3 n MW n LW.
• the CD/MD unit.

Tip
You can turn on this unit by pressing (SOURCE) on the
rotary commander.

By rotating the control (the SEEK/
AMS control)

(MODE)

(SOURCE)

Rotate the control momentarily and
release it to:
• Locate the beginnings of the tracks on the

tape. Rotate and hold the control, and

release it to fast-wind the tape. To

playback, rotate and hold the control

again, and release it.

• Locate a specific track on a disc. Rotate

and hold the control until you locate the

specific point in a track, then release it to

start playback.

• Tune in the stations automatically.

Rotate and hold the control to tune in the

specific station.

By rotating the control while
pushing in (the PRESET/DISC
control)

Push in and rotate the control to:
• Receive the stations memorized on the

preset buttons.

• Change the disc.

Other operations

Press (OFF) to
turn off the unit.

Press (SEL)
to adjust
and select.

OFF

Press (ATT)to
attenuate the
sound.

XR-C6100R:
Press (FILE) for two seconds
to change the Disc memo.

XR-C5100R:
Press (DSPL) to change the
displayed items.