Sony XR-C6090R User Manual

OFF

The rotary commander works by pressing
buttons and/or rotating controls.
You can control the optional CD/MD unit by
the rotary commander.

By pressing buttons (the SOURCE
and the MODE buttons)

Every time you press (SOURCE), the
source changes as follows:

TAPE n TUNER n CD n MD

Pressing (MODE) changes the operation in the
following ways:
• the tape transport.
• the band, FM1 n FM2 n FM3 n MW n LW.
• the CD/MD unit.

Tip
You can turn on this unit by pressing (SOURCE) on the
rotary commander.

By rotating the control (the SEEK/
AMS control)

Rotate the control momentarily and
release it to:
•Locate the beginnings of the tracks on the

tape. Rotate and hold the control, and
release it to fast-wind the tape. To
playback, rotate and hold the control
again, and release it.

•Locate a specific track on a disc. Rotate

and hold the control to locate the specific
point in a track, then release it to start
playback.

•Tune in the stations automatically.  Rotate

and hold the control to tune in the specific
station.

By rotating the control while
pushing in (the PRESET/DISC
control)

Push in and rotate the control to:
•Receive the stations memorized on the

preset buttons.

•Change the disc.

Other operations

Press (OFF) to
turn off the unit.

Press (ATT)to
attenuate the
sound.

XR-C6090R:
Press (FILE) for two seconds
to change the Disc memo.

XR-C5090R:
Press (DSPL) to change the
displayed items.

Press (SEL)
to adjust
and select.

(SOURCE)

(MODE)