Sony XR-C7500R User Manual
27
Selecting the spectrum
analyzer
analyzer
The sound signal level is displayed on a
spectrum analyzer. You can select a display
pattern from 1 to 6, or the automatic display
mode.
spectrum analyzer. You can select a display
pattern from 1 to 6, or the automatic display
mode.
Mode
Display patterns
SA 1
SA 2
SA 3
SA 4
SA 5
SA 6
off
Cancel
SA Auto
All of these display patterns
appear one by one automatically.
appear one by one automatically.
1
Press (SOURCE) to select a source (tape,
tuner, CD, or MD).
tuner, CD, or MD).
2
Press (MENU).
3
Press either side of (PRST/DISC)
repeatedly until “SA” appears.
repeatedly until “SA” appears.
4
Press (+) side of (SEEK/AMS) repeatedly
to select the desired setting.
Each time you press (+) side of
(SEEK/AMS), the setting changes as follows:
to select the desired setting.
Each time you press (+) side of
(SEEK/AMS), the setting changes as follows:
B
SA 1
B
… SA 6
SA Auto b
SA off b
5
Press (ENTER).
Listening to each
programme source in its
registered DSO
programme source in its
registered DSO
— Source Sound Memory (SSM)
Each time you return to the same source, you
can hear the same DSO menu and equalizer
curve registered for that source, even after
changing the programme source or turning the
unit off and then on again.
can hear the same DSO menu and equalizer
curve registered for that source, even after
changing the programme source or turning the
unit off and then on again.