Sony XR-C9100 User Manual
16
EN
1
Press (SHIFT).
2
Press (3) (SET UP) repeatedly until the
desired item appears.
desired item appears.
Each time you press (3) (SET UP), the item
changes as follows:
changes as follows:
Clock n D.Info* n Amber/Green n Dimmer
n Contrast n Voice* n Beep n RM n BBE*
n Contrast n Voice* n Beep n RM n BBE*
n LPF* n A.Scrl*
* When the radio is off, or when there is no
* When the radio is off, or when there is no
tape, CD, or MD being played, these items
will not appear.
will not appear.
Notes
• The displayed item will differ depending on the
• The displayed item will differ depending on the
source.
• If an optional digital preamplifier is connected to
the unit, BBE and Voice Guide do not work.
3
Press (5) (n) to select the desired
setting (for example: on or off).
For the “Contrast” setting, pressing (5)
(n) makes the contrast higher, and
pressing (2) (N) makes the contrast lower.
setting (for example: on or off).
For the “Contrast” setting, pressing (5)
(n) makes the contrast higher, and
pressing (2) (N) makes the contrast lower.
4
Press (SHIFT).
After the mode setting is complete, the
display returns to normal playback mode.
After the mode setting is complete, the
display returns to normal playback mode.
Adjusting the frequency
of the subwoofer(s)
of the subwoofer(s)
To match the characteristics of the connected
subwoofer(s), you can cut out the unwanted
high and middle frequency signals entering
the subwoofer(s). By setting the cut-off
frequency, the subwoofer(s) will output only
low frequency signals for a clearer sound
image.
subwoofer(s), you can cut out the unwanted
high and middle frequency signals entering
the subwoofer(s). By setting the cut-off
frequency, the subwoofer(s) will output only
low frequency signals for a clearer sound
image.
1
Press (SOURCE) to select a source (radio,
tape, CD, or MD).
tape, CD, or MD).
2
Press (SHIFT), then press (3) (SET UP)
repeatedly until “LPF” appears.
repeatedly until “LPF” appears.
3
Press (5) (n) or (2) (N) repeatedly to
select desired setting.
select desired setting.
Each time you press (5) (n) or (2) (N),
the cut-off frequency in the display changes
as follows:
the cut-off frequency in the display changes
as follows:
LPF 120 Hz ˜ LPF 80 Hz ˜ LPF off
4
Press (SHIFT).
When the frequency setting is complete, the
display returns to the normal playback
mode.
When the frequency setting is complete, the
display returns to the normal playback
mode.