Sony XR-C8100R User Manual
11
EN
Memorising only the
desired stations
desired stations
You can store up to 10 stations on each band
(20 for FM1 and FM2, 10 for each MW and
LW) in the order of your choice.
(20 for FM1 and FM2, 10 for each MW and
LW) in the order of your choice.
1
Press (SOURCE) repeatedly to select the
tuner.
tuner.
2
Press (MODE) repeatedly to select the
band (FM1, FM2, MW or LW).
band (FM1, FM2, MW or LW).
3
Push the SEEK/AMS control up or down
to tune in the station you want to store
on the number button.
to tune in the station you want to store
on the number button.
4
Press and hold the desired number
button ((1) to (10)) until “MEM”
appears.
The number button indication appears in
the display.
button ((1) to (10)) until “MEM”
appears.
The number button indication appears in
the display.
Note
If you try to store another station on the same
number button, the previously stored station will
be erased.
If you try to store another station on the same
number button, the previously stored station will
be erased.
Receiving the memorised
stations
stations
1
Press (SOURCE) repeatedly to select the
tuner.
tuner.
2
Press (MODE) repeatedly to select the
band (FM1, FM2, MW or LW).
band (FM1, FM2, MW or LW).
3
Press the number button ((1) to (10))
momentarily where the desired station is
stored.
momentarily where the desired station is
stored.
If you cannot tune in a preset
station
station
Push the SEEK/AMS control up or down
momentarily to search for the station
(automatic tuning).
Scanning stops when the unit receives a
station. Push the SEEK/AMS control up or
down repeatedly until the desired station is
received.
momentarily to search for the station
(automatic tuning).
Scanning stops when the unit receives a
station. Push the SEEK/AMS control up or
down repeatedly until the desired station is
received.
Cassette Player/Radio
Note
If the automatic tuning stops too frequently, press
(SHIFT), then press (4) (PLAY MODE) repeatedly
until “Local” (local seek mode) is displayed. Then
press (5) (n) to select “Local on.” Press (SHIFT).
Only the stations with relatively strong signals will
be tuned in.
If the automatic tuning stops too frequently, press
(SHIFT), then press (4) (PLAY MODE) repeatedly
until “Local” (local seek mode) is displayed. Then
press (5) (n) to select “Local on.” Press (SHIFT).
Only the stations with relatively strong signals will
be tuned in.
Tip
If you know the frequency of the station you want
to listen to push the SEEK/AMS control up or down
and hold until the desired frequency appears
(manual tuning).
If you know the frequency of the station you want
to listen to push the SEEK/AMS control up or down
and hold until the desired frequency appears
(manual tuning).
If FM stereo reception is poor
— Monaural Mode
— Monaural Mode
1
Press (SHIFT), then press (4) (PLAY
MODE) repeatedly until “Mono” appears.
MODE) repeatedly until “Mono” appears.
2
Press (5) (n) repeatedly until “Mono
on“ appears.
The sound improves, but becomes
monaural (“ST” disappears).
on“ appears.
The sound improves, but becomes
monaural (“ST” disappears).
3
Press (SHIFT).
To go back to normal mode, select “Mono off”
in step 2 above.
in step 2 above.
Changing the displayed items
Each time you press (DSPL), the item changes
as follows:
as follows:
z
Frequency (Station Name)*
1
zClock
MOTION DISPLAY*
2
Z
*
1
When you tune in an FM station that transmits
RDS data, the station name appears.
RDS data, the station name appears.
*
2
All the itmes above are scrolled in the display
one by one in order.
one by one in order.