Sony XR-C8220 User Manual
9
Fast-winding the tape
During playback, push the SEEK/AMS
control up or down and hold.
control up or down and hold.
To start playback during fast-forwarding or
rewinding, press (MODE) (*).
rewinding, press (MODE) (*).
Locating a specific track
— Automatic Music Sensor (AMS)
— Automatic Music Sensor (AMS)
During playback, push the SEEK/AMS
control up or down and release, for each
track you want to skip.
You can skip up to nine tracks at one time.
control up or down and release, for each
track you want to skip.
You can skip up to nine tracks at one time.
Note
The AMS function may not work when:
— the blanks between tracks are shorter than
The AMS function may not work when:
— the blanks between tracks are shorter than
four seconds.
— there is noise between tracks.
— there are long sections of low volume or quiet
— there are long sections of low volume or quiet
interludes.
Changing the display item
Each time you press (DSPL), the item changes
as follows:
as follows:
z
Tape playback z Clock
Frequency* Z
* While the ATA function is activated.
After you select the desired item, the display
will automatically change to the Motion
Display mode after a few seconds. In the
Motion Display mode, all the above items are
scrolled in the display one by one in order.
will automatically change to the Motion
Display mode after a few seconds. In the
Motion Display mode, all the above items are
scrolled in the display one by one in order.
Tip
The Motion Display mode can be turned off. (See
“Changing the sound and display settings” on
page 16.)
The Motion Display mode can be turned off. (See
“Changing the sound and display settings” on
page 16.)
To locate
preceding tracks
preceding tracks
To locate
succeeding tracks
succeeding tracks
Rewind
Fast-forward
Playing a tape in various
modes
modes
You can play the tape in various modes:
• NR (Dolby NR) lets you select the Dolby* NR
• NR (Dolby NR) lets you select the Dolby* NR
B system.
• B Skip (Blank Skip) skips blanks longer than
eight seconds.
• ATA (Automatic Tuner Activation) turns on
the tuner automatically when fast-winding
the tape.
the tape.
• Repeat (Repeat Play) repeats the current
track.
* Dolby noise reduction manufactured under
license from Dolby Laboratories Licensing
Corporation. “DOLBY” and the double-D
symbol a are trademarks of Dolby
Laboratories Licensing Corporation.
Corporation. “DOLBY” and the double-D
symbol a are trademarks of Dolby
Laboratories Licensing Corporation.
1
During playback, press (SHIFT).
2
Press (4) (PLAY MODE) repeatedly until
the desired play mode appears.
Each time you press (4) (PLAY MODE),
the item changes as follows:
the desired play mode appears.
Each time you press (4) (PLAY MODE),
the item changes as follows:
NR n B. Skip n ATA
3
Press (5) (n) to select “on.”
The selected play mode starts.
4
Press (SHIFT).
To return to normal playback mode, select
“off” in step 3 above.
“off” in step 3 above.
DSPL
SHIFT
1
2
3
4
5
6
7
8
9
1
SET UP PLAY MODE
REP
RLAY MODE