Sony MEX-R5 User Manual

Page of 152
43
Optional accessories
Overhead Monitor 
XVM-R70
Headrest Monitor 
XVM-H65
Mobile Monitor
XVM-F65 (for MEX-R1)
Mobile Monitor
XVM-F65WL 
(for MEX-R5)
CD changer (10 discs) 
CDX-757MX, CDX-656X
MD changer (6 discs)
MDX-66XLP
Source selector
XA-C30
AUX-IN selector
XA-300
Optical audio cable
RC-104
MPEG Layer-3 audio coding technology and 
patents licensed from Fraunhofer IIS and 
Thomson.
Note
This unit cannot be connected to a digital preamplifier 
or an equalizer which is Sony BUS system compatible.
Design and specifications are subject to change 
without notice.
Troubleshooting
The following checklist will help you remedy 
problems you may encounter with your unit.
Before going through the checklist below, check 
the connection and operating procedures.
US and foreign patents licensed from Dolby 
Laboratories.
• Lead-free solder is used for soldering certain 
parts. (more than 80 %)
• Halogenated flame retardants are not used in the 
certain printed wiring boards.
• Halogenated flame retardants are not used in 
cabinets.
• VOC (Volatile Organic Compound)-free vegetable 
oil based ink is used for printing the carton.
• Packaging cushions do not use polystyrene foam.
General
No power is being supplied to the unit.
• The power connection has not been made 
correctly.
t Check the connection. If everything is in 
order, check the fuse.
• The car does not have an ACC position.
t Insert a disc to turn on the unit.
• If the unit is turned off and the display 
disappears, it cannot be operated with the 
remote commander. 
t Turn on the unit.
The power aerial does not extend.
The power aerial does not have a relay box.
Stored stations and correct time are erased.
The fuse has blown.
Makes noise when the position of the 
ignition key is switched.
The leads are not matched correctly with the 
car’s accessory power connector.
The display disappears from/does not 
appear in the display window.
• The dimmer is set to “DIM-ON” (page 36).
• The display disappears if you press and hold 
(OFF).
t Press and hold (OFF) again until the 
display appears.
• The connectors are dirty (page 40).
DSO does not function.
Depending on the type of car interior or type 
of music, DSO may not have a desirable 
effect.
Depending on the connected monitor, the unit 
may take a few seconds to turn off after 
turning the ignition switch to the OFF 
position. This is not a malfunction.
continue to next page 
t