Sony 70AP User Manual
75
DSR Series
7-4. Special Commands for HVR Series
In the HVR series, the extension commands are located in the DEVICE DEPENDENT area of the 9-pin
command table.
These commands interpret DATA-1 as CMD-3.
command table.
These commands interpret DATA-1 as CMD-3.
7-4-1. Command Table
COMMAND
RETURN
HVR-1500
HVR-1500A
0X
.FA.E5 : EXTEND VIDEO INPUT SELECT
10
.01 : ACK
X
O
01
.FB.E5 : EXTEND VIDEO INPUT SENSE
14
.FB.E5 : EXTEND VIDEO INPUT STATUS
X
O
7-4-2. Detailed Description of Commands
0X
.FA.E5 : EXTEND VIDEO INPUT SELECT
This command is used to select a video input source according to DATA-2 to DATA-4.
When DATA-4 is omitted and “0x00” is set, the default HD/SD setting of the model is selected.
When DATA-4 is omitted and “0x00” is set, the default HD/SD setting of the model is selected.
[DATA-2]
[DATA-3]
[DATA-4]
This data can be omitted.
When this data is provided, specify the HD or SD mode according to DATA-4.
This data is invalid when specified input function is not provided due to no optional board, etc.
This data can be omitted.
When this data is provided, specify the HD or SD mode according to DATA-4.
This data is invalid when specified input function is not provided due to no optional board, etc.
BIT-1
BIT-0
MODE
0
1
HD
1
0
SD
n
The DATA-4 setting is valid in the following cases.
. When DATA-2 BIT-1 “SDI” is set
. When DATA-2 BIT-0 “ANALOG” and DATA-3 BIT-1 “Y/Pb/Pr” are set
The DATA-4 setting is valid in the following cases.
. When DATA-2 BIT-1 “SDI” is set
. When DATA-2 BIT-0 “ANALOG” and DATA-3 BIT-1 “Y/Pb/Pr” are set
BIT-4
BIT-5
BIT-6
BIT-7
BIT-3
BIT-2
BIT-1
BIT-0
INTERNAL
SG
SDI
ANALOG
BIT-4
BIT-5
BIT-6
BIT-7
BIT-3
BIT-2
BIT-1
BIT-0
S (Y/C)
Y/Pb/Pr
COMPOSITE