Lg Electronics HT302SD-A8 User Manual

Page of 24
9
Function Selection
You can select the different functions by
pressing the different function keys in the remote as
follows:
Band (for FM & AM), DVD/CD, AUX, USB)
Speaker System Connection
Connect the speaker cords to the speaker terminals.
To obtain the best possible surround sound, adjust 
the speaker parameters (volume, distance, etc.).
• Be  sure  to  match  the  speaker  cable  to  the 
appropriate terminal on the components: + to + and– 
to  –.  If  the  cables  are  reversed,  the  sound  will  be 
distorted and will lack base.
• If  you  use  front  speakers  with  low  maximum  input 
rating, adjust the volume carefully to avoid excessive 
output on the speakers.
 
Antenna Connection
Connect  the  AM  Loop  aerial  to  the  AM  aerial 
connector.
Connect  the  FM  Wire  aerial  to  the  FM  aerial 
connector.
Notes: 
To prevent noise pickup, keep the AM Loop aerial 
away  from  the  DVD/CD  Receiver  and  other 
components.
Be sure to fully extend the FM wire aerial.
After  connecting  the  FM  Wire  aerial,  keep  it  as 
horizontal as possible.
Connect the supplied FM/AM antenna for listening to
the radio. 
INPUT
AUX IN
L
R
FM Wire Antenna
(Supplied)
AM Loop Antenna
(Supplied)
Be careful of the following
Be careful to make sure children do not put their
hands or any objects into the *speaker duct.
*Speaker duct: A hall for plentiful bass sound 
on speaker cabinet(enclosure). Use the rear 
speaker at least 30 CM away from either TV 
screen or PC monitor.
5.1
Assuming you are centered in the middle of your couch,
facing your TV display and center-channel speaker
at 0 degree, then your left and right main front speakers
should be within a 22 to 30 degree angle to each
side, viewed from your seat.
The main left and right surrounds should be to the
respective sides of the listening area, above ear level if
possible (ideally 2 feet or more) at an angle of 90
to 110 degrees from the front center.
Channel Speaker System
Configuration