Blaupunkt 320 User Manual

Page of 40
4
Safety notes
The car sound system was manufactured accord-
ing to the state of the art and established safety 
guidelines. Even so, dangers may occur if you do 
not observe the safety notes in these instructions.
These instructions contain important informa-
tion to easily and safely install and operate the car 
sound system.
 • Read these instructions carefully and com-
pletely before using the car sound system.
 • Keep the instructions at a location so that they 
are always accessible to all users.
 • Always pass on the car sound system to third 
parties together with these instructions.
In addition, observe the instructions of the devices 
used in conjunction with this car sound system.
Symbols used
These instructions employ the following symbols:
DANGER!
Warns about injuries
CAUTION!
Warns about damaging the CD drive
DANGER!
Warns about high volume
The CE mark confi rms the compliance 
with EU directives.
 
쏅 Identifi es a sequencing step
 • Identifi es a listing
Road safety
Observe the following notes about road safety:
 • Use your device in such a way that you can 
always safely control your vehicle. In case of 
doubt, stop at a suitable location and operate 
your device while the vehicle is standing.
 • Remove or attach the control panel only 
while the vehicle is standing.
 • Always listen at a moderate volume to pro-
tect your hearing and to be able to hear acous-
tic warning signals (e.g. police sirens). During 
mute phases (e.g. when changing the audio 
source), changing the volume is not audible. 
Do not increase the volume during this mute 
phase.
General safety notes
Observe the following notes to protect yourself 
against injuries:
 • Do not modify or open the device. The device 
contains a Class 1 laser that can cause injuries 
to your eyes.
 • Do not increase the volume during mute 
phases, e.g. when changing the audio source. 
Changing the volume is not audible during a 
mute phase. Do not increase the volume dur-
ing mute phases, e.g. when changing the audio 
source.
Use as directed
This car sound system is intended for installation 
and operation in a vehicle with 12 V vehicle sys-
tem voltage and must be installed in a DIN slot. 
Observe the performance limits in the technical 
data. Repairs and installation, if necessary, should 
be performed by a specialist.
Installation instructions
You may only install the car sound system your-
self if you are experienced in installing car sound 
systems and are very familiar with the electrical 
system of the vehicle. For this purpose, observe 
the installation instructions at the end of these 
instructions.
Safety notes