Blaupunkt MP35 User Manual
![Blaupunkt](https://files.manualsbrain.com/attachments/3eb2aacd7ed82dc9e942a04c9a5a10bcd87c31f6/common/fit/150/50/bc73a504302e94c234f66b6feade2db4bc221d550d62cb3e35ba7c0a581a/brand_logo.gif)
65
DANSK
ENGLISH
DEUTSCH
FRANÇAIS
IT
ALIANO
NEDERLANDS
SVENSKA
ESP
AÑOL
PORTUGUÊS
Entering the power-on
message
message
After you switch on your device, the
system displays a short message in the
display. The factory default setting is the
“BLAUPUNKT” text. Instead of this, you
can enter your own text up to 9 charac-
ters long.
system displays a short message in the
display. The factory default setting is the
“BLAUPUNKT” text. Instead of this, you
can enter your own text up to 9 charac-
ters long.
➮
Press the MENU button
7.
➮
Press the or button
6 repeat-
edly until “ON MSG” appears in the
display.
display.
➮
Press the button
6.
The default text for the power-on mes-
sage appears in the display. The input
cursor flashes at the beginning of the
line.
sage appears in the display. The input
cursor flashes at the beginning of the
line.
Note:
●
You can delete the entire line by
pressing and holding down the
pressing and holding down the
or button
6 for longer than
two seconds.
To enter a different text,
➮
select a letter using the or but-
ton
ton
6.
➮
Move the selection cursor using
the or button
the or button
6.
Once you have entered the message,
➮
press the MENU button
7 twice.
The settings are saved.
Configuring the level
display
display
The level display temporarily provides
you with a symbolic representation of
the volume and audio settings whilst you
are adjusting them.
you with a symbolic representation of
the volume and audio settings whilst you
are adjusting them.
When you are not changing any set-
tings, the level display depicts the peak
music/speech output. You can switch
the level display on/off.
tings, the level display depicts the peak
music/speech output. You can switch
the level display on/off.
➮
Press the MENU button
7.
“MENU” appears in the display.
➮
Press the or button
6 repeat-
edly until “PEAK LVL” appears in
the display.
the display.
➮
Press the or button
6 to
switch between “PEAK ON” and
“PEAK OFF”.
“PEAK OFF”.
When you have finished adjusting the
setting,
setting,
➮
press the MENU button
7 twice.
POWER-ON MESSAGE
LEVEL DISPLAY
02BrooklynMP35_gb
19.08.2005, 14:45 Uhr
65