Blaupunkt MP76 User Manual

104

Miscellaneous

Entering a switch-on message

If you switch on the device, a brief message
is shown on the display as scrolling text.
This text is factory set to "BLAUPUNKT-THE
ADVANTAGE IN YOUR CAR". Instead, you
can enter your own text of up to 35 char-
acters.

Press the

MENU button

Press the softkey

5 with the display

label "VARIOUS".

Press the softkey

5 with the display

label "ON MSG".

The display shows the standard text for the
switch-on message. The input mark is at the
beginning of the line and ﬂ ashing.

To input a different text,

press the joystick

8 left or right to

move the input mark.

Set the desired letter by pushing the
joystick

8 up or down.

After entering the message, press the
OK joystick

8 or the MENU button 9

to exit the menu.

The settings are saved.

쏅
쏅

쏅

Displaying the serial number

You can display the serial number of the
device.

Press the

MENU button

Press the softkey

5 with the display

label "VARIOUS".

Press the softkey

5 with the display

label "SER NUM".

The serial number of the device is displayed
in the top line of the display.

Press the

OK joystick

8 or the MENU

button

9 to exit the menu.

Resetting the device

You can reset the device to the factory-pre-
set parameters. All personal settings are
lost in the process.

Press the

MENU button

Press the softkey

5 with the display

label "VARIOUS".

Press and hold the softkey

5 with the

display label "NORMSET" for longer
than two seconds.

The device switches off and automatically
on again.

쏅
쏅

쏅

쏅
쏅

쏅

Miscellaneous

02a_BremenMP76_eng.indd 104

07.07.2006 14:44:31 Uhr