Audiovox 128-6812 User Manual

128-6812

5 of 24

The Audiovox SIRIUS® Shuttle processes the satellite
signals received by the externally mounted antenna
(purchased separately as part of the Home or Vehicle
Kits).  The Shuttle recognizes and decodes the incoming
SIRIUS® program information and provides an audio
signal to your radio or other audio output equipment.

NOTE: The SIRIUS® signal can be received and

processed virtually anywhere as long as there
are no obvious satellite signal obstructions
such as nearby buildings, high terrain,
parking  garages or tunnels.
The Shuttle is typically installed in an
accessible location of the vehicle (dash area),
consistent with line-of-sight operation of the
remote control, and/or within easy reach of the
driver. For  home use, situate the Shuttle
close to your stereo receiving equipment.

You can begin to enjoy Sirius® Satellite Radio as soon
as the Shuttle and Kit installation are complete:

1. Set up your Audiovox Shuttle using the installa-

tion instructions included in your Home Kit or
Vehicle Kit, or with the help of a professional
installer.
NOTE: Refer to Antenna Aiming (page 18) during
the installation procedure.

2. When power is available to the unit, note that the

integral Power button LED icon lights red. Then
press the Power button to turn on the Shuttle.

3. The Sirius logo ( 

 ) appears on the display

followed by the Sirius preview stream. If not go to
stream 184 using the direct channel method,
page 9.

4. To obtain the Sirius identification (ID) number, press

and hold the MODE button for 2 seconds. The MENU
OPTIONS page appears with the Sirius ID option
highlighted. Press the Select ( 

 ) Button and the 12

digit Sirius ID number will appear. Press the Select
( 

 ) or Mode Button to exit the function. Write the

number here for future reference.

5. Activate your Sirius® radio service ---- it’s easy.  You

have one of two choices to activate your service:

-5-