JL Audio SB-D-DRNGO2/10W3v3/TN Leaflet
I N S T A L L A T I O N G U I D E
for the
SB-D-DRNGO2/10W3v3
SB-D-DRNGO2/10W3v3
2004 - Up Dodge Durango
2004 - Up Dodge Durango
2007 - Up Chrysler Aspen
2007 - Up Chrysler Aspen
Will not fit SUVs with the facotry woofer
Will not fit SUVs with the facotry woofer
and or power lift gate
and or power lift gate
Thank you for choosing a JL Audio Stealthbox
®
for your automotive sound system. With proper
installation, your new vehicle-specific enclosed subwoofer system will deliver years of listening pleasure.
We strongly recommend that you have your new Stealthbox
®
installed by your authorized JL Audio
dealer. The installation professionals employed by your dealer have the necessary tools and experience
to disassemble and reassemble your vehicle properly. Also, keep in mind that your warranty coverage
extends to 2 years if your system is installed or approved by your authorized JL Audio dealer. If you
prefer to perform your own installation, please read this installation guide completely
before beginning the process.
If you choose to perform the installation yourself, it is absolutely vital that
the Stealthbox
the Stealthbox
®
be properly mounted to the vehicle according to these
instructions. Failure to mount the enclosure properly presents two problems:
1) The sub-bass performance will suffer due to the movement of the enclosure
caused by the force exerted by the woofer(s).
caused by the force exerted by the woofer(s).
2) A loose enclosure presents a serious safety hazard in the event of a collision
or sudden deceleration.
or sudden deceleration.
S T E P 1
From outside the SUV, remove the driver’s side rear plastic
wheel well.
From outside the SUV, remove the driver’s side rear plastic
wheel well.
Continued on Next Page
S T E P 2
From inside the SUV, place the supplied wax square onto the
driver’s side wheel well, as in the picture.
From inside the SUV, place the supplied wax square onto the
driver’s side wheel well, as in the picture.
S T E P 3
Thread the supplied socket cup screw into the rear of the
Stealthbox®, leaving 1/4-inch of the threads exposed.
Thread the supplied socket cup screw into the rear of the
Stealthbox®, leaving 1/4-inch of the threads exposed.
Place the Stealthbox® into the mounting location and press
firmly onto the Stealthbox®.
firmly onto the Stealthbox®.
Remove the Stealthbox® carefully, leaving the wax square in
place. The socket cup set screw will leave an impression onto
the wax square.
place. The socket cup set screw will leave an impression onto
the wax square.
SB-D-DRNGO2/10W3v3_INSTR_SKU#011239
SB-D-DRNGO2/10W3v3_INSTR_SKU#011239
INSTALLATION
D I F F I C U L T Y :
D I F F I C U L T Y :
2
5
OUT
OF
OF
ESTIMATED TIME:
1 HOUR
1 HOUR