JL Audio SB-F-RTRKCTR/12W3v2-D2 User Manual

➔

➔

➔

➔

➔

➔

STEP 17: A)  Line up small angle bracket to front
middle of OEM inner(cut) console and mark hole.

STEP 17: B) Using an 1/8” drill bit, drill
marked hole.

➔

➔

STEP 17: C) Mount the small angle bracket using
the suppied black rivet and small washer.

STEP 18: Place inner (cut) OEM console inside
outter OEM console / top of Stealthbox.

Drill six holes using 1/8” drill bit. Using the OEM
inner console’s lid mounting holes as guides.

STEP 19: Using the six(out of seven) T-15 Torx
bolts that was removed in STEP 10, mount lid.

STEP 20: With lid mounted, drill “7th” hole
using a 1/8” drill bit.
Don’t forget to bolt down lid strap with the
7th t-15 Torx screw.

S B - F - RT E K C T R / 1 2 W 3 v 2 - D 2 ,   J L   AU D I O,   I n c   2 0 0 2

S h e e t   S K U # 0 1 1 1 5 9   R ev i s i o n   1 1 / 1 8 / 2 0 0 3

➔

➔

STEP 16: Use masking tape to mark cutting
template.

IMPORTANT!!!! Please read STEP 16 A and

B before cutting.

Using a suitable saw to cut OEM inner
console.

A) Cut 1 1/2” under lip. Where there is no
ledge/reinforcement

B) Where there is a ledge/reinforcement cut
1 5/16” under the ledge/reinforcement.