JL Audio SB-F-Edg/10W3v3 User Manual
Continued on Next Page
SB-F-EDG/10W3v3_INSTR_SKU# 011254
s t e P 2 3
Position provided grille template on front of side of cargo
panel so as to cover storage pocket opening and, align with
horizontal ridges below. Tape into place.
Position provided grille template on front of side of cargo
panel so as to cover storage pocket opening and, align with
horizontal ridges below. Tape into place.
s t e P 2 2
Using provided grill as a guide, mark the required grill open-
ing onto the side cargo panel with grease pencil or masking
tape. Cut out opening to allow fitment of grill with maximum
open area.
Using provided grill as a guide, mark the required grill open-
ing onto the side cargo panel with grease pencil or masking
tape. Cut out opening to allow fitment of grill with maximum
open area.
s t e P 2 1
Remove storage compartment from side panel.
Remove storage compartment from side panel.
s t e P 2 0
Place cargo side panel onto a flat surface with back side up.
Locate back side of storage compartment. Carefully grind
heads of plastic spot welds to allow removal of compartment
enclosure. Take care not to damage front of panel.
Place cargo side panel onto a flat surface with back side up.
Locate back side of storage compartment. Carefully grind
heads of plastic spot welds to allow removal of compartment
enclosure. Take care not to damage front of panel.
Page 4 • JL Audio, Inc 2008
S T E P 2 5
Install grille with short #8 screws and #8 flat washers as
provided.
Install grille with short #8 screws and #8 flat washers as
provided.
S T E P 2 6
Step backwards through steps 7- 1, installing side cargo
panel, side threshold plate, rear seat belt bolt, rear threshold
plate and floor as removed.
Step backwards through steps 7- 1, installing side cargo
panel, side threshold plate, rear seat belt bolt, rear threshold
plate and floor as removed.
C o n G R a t u l a t I o n s !
You have completed the installation for this model!
Enjoy your new Stealthbox®!
Please refer to the Power Recommendation section for an
amplifier recommendation and basic set-up help.
amplifier recommendation and basic set-up help.
S T E P 2 4
Drill 1/8 inch holes as indicated on template.
Drill 1/8 inch holes as indicated on template.