JL Audio SB-POL-RNGR700 User Manual

I n s t a l l a t I o n G u I d e

for the

SB-POL-RNGR700

sKu#94457

2009+

Thank you for choosing a JL Audio Stealthbox

for your side by side sport utility sound system. With

proper installation, your new vehicle-specific enclosed subwoofer system will deliver years of listening

pleasure.

We strongly recommend that you have your new Stealthbox

installed by your authorized JL Audio

dealer. The installation professionals employed by your dealer have the necessary tools and experience

to disassemble and reassemble your vehicle properly. Also, keep in mind that your warranty coverage

extends to 2 years if your system is installed or approved by your authorized JL Audio dealer. If you

prefer to perform your own installation, please read this installation guide completely

before beginning the process.

If you choose to perform the installation yourself, it is absolutely vital that the

Slampak

be properly mounted to the vehicle according to these instructions.

Failure to mount the enclosure properly presents two problems:
1) The sub-bass performance will suffer due to the movement of the enclosure

caused by the force exerted by the woofer(s).
2) A loose enclosure presents a serious safety hazard in the event of a collision

or sudden deceleration.

s t e P 1
Clean off the area around the drivers seat, and the floor
around the drivers side.

Remove the seat bottom cusion.

Continued on Next Page

s t e P   2
Looking down from the passenger side through the
opening where the driver would sit.  Use the long bolt going
down through location #1 as reference (see detail below),
pivot bracket untill the end at #2 is parallel with the outer
frame rail.  Mark the hole at #2 and drill the frame rail.

notice the orientation of the bracket with the hole

closer to the end being installed towards the frame

rail.

d e t a I l

SB-POL-RNGR700 INSTR_SKU# 011295

InstallatIon

d I F F I C u lt Y :

out

estImated tIme:

1-2 HouRs

Stealthbox