JL Audio SB-T-TUNDC/8W7 User Manual

Page of 3
SB-T-TUNDC/8W7_INSTR_SKU#011247
SB-T-TUNDC/8W7_INSTR_SKU#011247
C O N G R A T U L A T I O N S
You have completed the installation for this model!
Please refer to the Power Recommendation section for an 
amplifier recommendation and basic set-up help.
S T E P   1 3
Lower the rear seat and replace any removed contents. 
S T E P   1 2
Using the factory bolt that was removed in STEP 4,  secure 
the L-bracket and the seat belts’ mount to the floor. 
Page 3 • JL Audio, Inc 2007
All specifications are subject to change without notice. “JL Audio®” and the JL Audio logo, “Stealthbox” and the Stealthbox logo are registered 
trademarks of JL Audio, Inc. “Ahead of the Curve” and its respective logo is a trademark of JL Audio, Inc. 
JLA-SKU#011247  -09-11-200
JLA-SKU#011247 -09-11-2007
7  •  Printed in USA  •  ©2007 JL Audio, Inc.  •  U.S. PATENTS:  #5,734,734  #5,949,898  #6,118,884  #6,229,902  
#6,243,479  #6,294,959  #6,501,844  #6,496,590  #6,441,685  #5,687,247  #6,219,431  #6,625,292  #D472,891  #D480,709  Other U.S. & Foreign 
patents pending. For more detailed information please visit us online at www.jlaudio.com.
(954) 443-1100
w w w . j l a u d i o . c o m
1 0 3 6 9   N O R T H   C O M M E R C E   P A R K W A Y     •     M I R A M A R ,   F L O R I D A     •     3 3 0 2 5     •     U S A
I N C L U D E D   H A R D W A R E
(2)
(2) 3/8-inch -16 x 1-inch Hex Bolt   
 3/8-inch -16 x 1-inch Hex Bolt   
(2)
(2) 3/8-inch Split Lock Washer
 3/8-inch Split Lock Washer
(2)
(2) 3/8-inch Flat Washer 
 
 3/8-inch Flat Washer 
 
(2)
(2) L-Bracket
 L-Bracket
S P E C I F I C A T I O N S
Enclosure Type: Bass Reflex (ported)
Bass Reflex (ported)
Driver Type: 8W7
8W7
Nominal Impedance: 3 ohms mono
3 ohms mono
Continuous Power Handling: 300 Watts
300 Watts
P O W E R   R E C O M M E N D A T I O N
P O W E R   R E C O M M E N D A T I O N
JL Audio recommends using a high quality amplifier such as the JL Audio 250/1v2.  
The diagram below shows the recommended crossover, infrasonic filter and equalizer settings for the 250/1v2 
when being used to power your Stealthbox
®
.
The JL Audio 250/1v2 is a very versatile audio component.  Please consult the owner’s manual for even more 
detailed information about installing and tuning this amplifier.
M I D / H I G H   F R E Q U E N C Y   D R I V E R   F I T M E N T
A variety of JL Audio coaxial and component systems will fit in the factory speaker locations of you vehicle.
Front Speaker Size / Location: 6-inch x 9-inch / Front Doors
6-inch x 9-inch / Front Doors
Fits JL Audio Models**: *TR690-TXi & *VR690-CXi
TR690-TXi & *VR690-CXi
Rear Speaker Size / Location: 6.5-inch / Rear Doors
6.5-inch / Rear Doors
Fits JL Audio Models: *TR650-CXi, *TR650-CSi, *VR650-CXi, *VR650-CSi, *XR650-CXi, XR650-CSi, 
 *TR650-CXi, *TR650-CSi, *VR650-CXi, *VR650-CSi, *XR650-CXi, XR650-CSi, 
 
 
 *C5-650x, *C5-650 & *ZR650-CSi
 
 
 *C5-650x, *C5-650 & *ZR650-CSi
 
 
 
 
*Spacer ring is required for proper mounting.
*Spacer ring is required for proper mounting.
 
 
**Other size speakers may be used, custom mounting ring is required.
 
 
**Other size speakers may be used, custom mounting ring is required.