JL Audio SB-VW-NB/10W3 User Manual

STEALTHBOX

Installation of this Stealthbox requires professional installation skills and tools.  Please read this installation guide 
thoroughly before beginning the project.  It will guide you step by step through the installation.  It is absolutely 
vital that the enclosure be properly mounted to the vehicle according to these instructions.  Failure to mount 
the enclosure properly presents two problems:  1) The sub-bass performance will suffer due to the movement 
of the enclosure and 2) A loose enclosure presents a serious safety hazard in the event of a collision or sudden 
deceleration.

Stealthbox SB-VW-NB/10W3

Stealthbox 2000

Sheet SKU#011143  Revision 03/15/01

STEP 1:  Remove the carpet from the fl oor of the trunk 

including the rear fl ap and hardware used to secure it 
(This hardware will be used later in the installation).

STEP 2:  Remove the contents of the spare tire well.

STEP 3:  Place the supplied wax square in the location 

shown in Picture #1.

STEP 4:  Fully insert the supplied bolt into the insert on the 

bottom of the Stealthbox.

STEP 5:  Place the Stealthbox in the trunk in its proper 

location as shown in Picture #2 and push down fi rmly 
to force the bolt head to make an imprint in the wax 
square.

STEP 6:  Remove the Stealthbox and locate the impression 

in the wax square.

STEP 7:  Drill a 3/8” hole in the location of the imprint 

in the wax square.

SB-VW-NB/10W3

Fits 1998-00 Volkswagen Beetle