JL Audio SB-GM-TRKEXTP/10W1 User Manual
Sheet SKU#011120 Revision 8/8/00
10369 N. Commerce Pkwy, Miramar, Florida 33025-3921 Voice: (954) 443-1100 Fax: (954) 443-1111
Specifications:
Enclosure Type: Acoustic Suspension (Sealed)
Driver Type: JL AUDIO 10W1-4 Subwoofer
Cont. Power Handling: 125 Watts
Nominal Impedance: 4
Driver Type: JL AUDIO 10W1-4 Subwoofer
Cont. Power Handling: 125 Watts
Nominal Impedance: 4
Ω
Special Information on using this Stealthbox with its partner enclosure, the SB-GM-TRKEXTD/10W1:
Both enclosures are shipped with 4 ohm 10W1
subwoofers. Should you wish to run both to a single ampli-
fier, we recommend running them in stereo (one box to
each amplifier channel). In some cases, your amplifier may
be capable of driving a 2 ohm mono load which is achiev-
able by wiring the two boxes in parallel and connecting them
to the mono-bridged amplifier. Before attempting this make
sure that the amplifier is designed to drive an impedance
this low.
subwoofers. Should you wish to run both to a single ampli-
fier, we recommend running them in stereo (one box to
each amplifier channel). In some cases, your amplifier may
be capable of driving a 2 ohm mono load which is achiev-
able by wiring the two boxes in parallel and connecting them
to the mono-bridged amplifier. Before attempting this make
sure that the amplifier is designed to drive an impedance
this low.
If you would like to achieve a 4 ohm mono load, the 4 ohm
10W1's may be replaced with 8 ohm 10W1's with no
penalty in performance. To achieve a 4 ohm mono load
with two 8 ohm 10W1's connect them in parallel to the
mono-bridged amplifier.
10W1's may be replaced with 8 ohm 10W1's with no
penalty in performance. To achieve a 4 ohm mono load
with two 8 ohm 10W1's connect them in parallel to the
mono-bridged amplifier.
SB-GM-TRKEXTP/10W1, JL AUDIO, Inc 1997 • Page 3
Both Enclosures Installed
SB-GM-TRKEXTD and SB-GM-TRKEXTP