JL Audio SB-H-CIVCPE/12W3v2 User Manual

➔

➔

➔

➔

Stealthbox

®

S B - H - C I V C P E 2 / 1 2 W 3 v 2 ,   J L   AU D I O,   I n c   2 0 0 4

S h e e t   S K U # 0 1 1 1 5 8     R ev i s i o n   9 / 1 7 / 2 0 0 4  

for the

SB-H-CIVCPE/12W3v2

(Fits 2001-2003 Honda Civic Coupe, 

2-door)

This Stealthbox is a product which

requires professional installation skills and
tools.
Please read this installation guide thor-
oughly before beginning the project. It
will guide you step by step through the
installation. Several of the steps in this
process may require two people to
accomplish.

It is absolutely vital that the enclosure

be properly mounted to the vehicle
according to these instructions. Failure
to mount the enclosure properly pres-
ents two problems: 1) The sub-bass
performance will suffer due to the
movement of the enclosure caused by
the force exerted by the woofer(s) and
2) A loose enclosure presents a serious
safety hazard in the event of a collision
or sudden deceleration.

STEP 1: Remove the factory cargo net, net
hooks and the flooring.

STEP 2: Cut the passenger’s side wood floor-
boards ear. Do this outside of the vehicle.

Using a straight edge and marking a line will
help in cutting a straight line.

STEP 3: Only remove this cargo net hook.
This is on the passenger side of the trunk.

*In the next two steps ,you need to plot
two marked locations from measure-
ments. This is to find the proper loca-
tion of the placement of the supplied
wax square.* 

STEP 4: Measuring 5.0” (127mm) from the
floor, up to the mark from STEP 4. Mark
location.

STEP 5: Measuring 8” (203.22mm) from the
rear of the back rear to the trunk opening,
mark location.

STEP 6: This placement of the wax square is
not going to allow for good adhesion. Using a
heavy duty style tape will help the wax square
to stay into place.

*You do not want the wax square to
move, when placing the Stealthbox
into place, in STEP 9.*

➔

➔

➔

➔ ➔

➔

➔