Panasonic SC-HC58DB User Manual

RQT9756

With this function set to “ON”, you can stream music 
from the iOS device or Mac / PC (iTunes 10.2.2 or 
later) to this unit without the need of a wireless network 
router.
≥ Previous network settings will be deleted when this 

function is set to “ON”.

≥ The following explanations are based on an iPhone.

Press [SETUP] repeatedly to select 
“D.CONNECT”.

Press [3, 4] to select “ON” and then press [OK].

Press [3, 4] to select “OK? YES” and then press 
[OK].

Connect your iPhone to this unit’s wireless 
network named “HC58 _ _ _ _ _ _”*

2

.

Enter the password that is indicated on this unit’s 
display.

Once the iPhone is connected to this unit’s 
wireless network, the setup is completed.

Continue to step 2 of “Using AirPlay with this unit’s 
speakers” (l 10).

≥ This setting is reset to “OFF” when other network settings are 

performed. (l 7)

≥ When “D.CONNECT” is set to “ON”, this unit will not be 

connected to the Internet. It is not possible to update the 
software or check the Wi-Fi signal strength.

≥ When AirPlay is not being used, disconnect the AirPlay 

compatible device from this network.

≥ When using a computer on this network, make sure that all 

the shared files are encrypted.

≥ This feature is only compatible with the “Open System” 

authentication method. It is not compatible with “Shared Key” 
authentication method.

The first time “D.CONNECT” is set to “ON”, a 
password for this unit’s wireless network is randomly 
created and memorised in this unit.
≥ This password is memorised until it is changed.

1

While “D.CONNECT” is set to “ON”:
Press [SETUP] repeatedly to select 
“D.CONNECT”.

2

Press [3, 4] to select “ON” and then press [OK].

3

The current password is displayed.
≥ The 5 digits after “PW” is the password for this 

network.

4

Press any button to exit.

1

While “D.CONNECT” is set to “OFF”:
Press [SETUP] repeatedly to select 
“D.CONNECT”.

2

Press [3, 4] to select “CHANGE PW” and then 
press [OK].

3

Press [3, 4] to select “OK? YES” and then press 
[OK].

4

The new password is displayed.
≥ The 5 digits after “PW” is the new password for 

this network.

5

Press any button to exit.

∫ Note about changing the password

After changing this unit’s wireless network password, if 
you are not prompted to change the password on the 
other devices, the following changes are required.

iOS device (iPod touch/iPhone/iPad)*

3

:

≥ Before choosing this unit’s network, 

1

Select [

] located beside this unit’s wireless 

network name.

2

Select “Forget this Network” and then select 
“Forget”.

3

Select this unit’s wireless network and enter the 
new password.

Mac/PC:
≥ If the computer has memorised the old password, be 

sure to change the memorised password for this 
unit’s wireless network to the new one.

≥ Refer to the devices’s operating instructions for details.

*1: “ _ ” stands for a digit.
*2: “ _ ” stands for a digit that is unique to each set.
*3: Steps are based on iOS 6.0.1.

“PW _ _ _ _ _ ”*

1

 is displayed.

The 5 digits after “PW” is the password for this 
network.

 _ _ _ _ _ _

 _ _ _ _ _ _

Display the password

Change the password

SC-HC58DBEB_DBGN_GS~RQT9756-B.book  11 ページ  ２０１３年１月２９日　火曜日　午前１０時１２分