Panasonic SC-HC58DB User Manual
18
RQT9756
Sound adjustment
The following sound effects can be added to the audio
output.
output.
1
Press [SOUND] repeatedly to select the effect.
2
Press [3, 4] to select the setting and then press
[OK].
[OK].
≥ You may experience a reduction in sound quality when these
effects are used with some sources. If this occurs, turn the
sound effects off.
sound effects off.
Clock and Timer
This is a 24-hour clock.
1
Press [SETUP] repeatedly to select “CLOCK”.
2
Press [3, 4] to set the time and then press [OK].
≥ To display the clock, press [SETUP] to select “CLOCK” and
then press [OK] once. The time is displayed for 10 seconds.
(During standby, press [DISPLAY] once.)
(During standby, press [DISPLAY] once.)
≥ The clock is reset when there is a power failure or when the
AC mains lead is removed.
≥ Reset the clock regularly to maintain accuracy.
You can set the timer so this unit turns on at a certain
time every day.
time every day.
Preparation
Set the clock (l left).
Set the clock (l left).
∫ Setting the timer
1
Press [SETUP] repeatedly to select “TIMER ADJ”.
2
Press [3, 4] to set the starting time (“ON TIME”)
and then press [OK].
and then press [OK].
3
Press [3, 4] to set the finishing time
(“OFF TIME”) and then press [OK].
(“OFF TIME”) and then press [OK].
∫ Turn the timer on
1
Select the music source*
1
and set the desired
volume.
2
Press [SETUP] repeatedly to select “TIMER SET”.
3
Press [3, 4] to select “SET” and then press [OK].
≥ “
F” is displayed.
≥ To turn the timer off, select “OFF”.
4
Press [Í] to turn the unit off.
≥ To display the timer settings, press [SETUP] repeatedly to
select “TIMER ADJ” and then press [OK] once.
The music source and volume will also be displayed if the
timer is turned on.
The music source and volume will also be displayed if the
timer is turned on.
≥ During standby, if the timer is turned on, press [DISPLAY]
twice to display the settings.
≥ This unit can be used as normal after the timer is set,
however:
– Turn the unit to standby mode before the timer start time.
– Even if the audio source or the volume is changed, the
– Turn the unit to standby mode before the timer start time.
– Even if the audio source or the volume is changed, the
timer will still use the audio source and volume that was
set when the timer was turned on.
set when the timer was turned on.
The sleep timer can turn the unit off after a set time.
1
Press [SETUP] to select “SLEEP”.
2
Press [3, 4] to set the time (in minutes) and then
press [OK].
press [OK].
“SLEEP 30”
,. “SLEEP 60” ,. “SLEEP 90” ,. “SLEEP 120”
^--------------------.
OFF (Cancel)
(--------------------J
≥ The remaining time is indicated on the unit’s display
except when other operations are performed.
≥ The play timer and sleep timer can be used together.
The sleep timer always has priority.
Direct-Vocal
Surround
(D.SURROUND)
Surround
(D.SURROUND)
“LEVEL 1”, “LEVEL 2” or “OFF”.
≥ The factory preset is “OFF”.
Preset EQ
(PRESET EQ)
(PRESET EQ)
“HEAVY” (heavy), “SOFT” (soft),
“CLEAR” (clear), “VOCAL”
(vocal) or “FLAT” (flat/off).
“CLEAR” (clear), “VOCAL”
(vocal) or “FLAT” (flat/off).
≥ The factory preset is “HEAVY”.
Bass (BASS) or
Treble (TREBLE)
Treble (TREBLE)
Adjust the level (j4 to i4).
Dynamic Bass
(D.BASS)
(D.BASS)
“ON D.BASS” or “OFF D.BASS”.
≥ The factory preset is “ON D.BASS”.
Setting the clock
Play timer
*1: “CD”, “USB”, “IPOD_PORT”, “IPOD_DOCK”,
“DAB/DAB+” ([SC-HC58DB]) and “FM” can be set as the
music source.
music source.
Sleep timer
SC-HC58DBEB_DBGN_GS~RQT9756-B.book 18 ページ ２０１３年１月２９日 火曜日 午前１０時１２分