Dynaudio ESOTEC User Manual
Connecting the Esotec crossovers
Esotec / Esotar
2
Series
13
1. To connect the woofer
X Connect terminal 3 to the + terminal of the woofer.
X Connect terminal 4 to the – terminal of the woofer.
X Connect terminal 4 to the – terminal of the woofer.
2. To connect the tweeter
The terminals 5, 6 and 7 offer the ability to fine-tune the sound level. This makes it possible to adjust the level
according to the placement of the speaker in the car and to your personal preference.
according to the placement of the speaker in the car and to your personal preference.
X Connect terminal 5 or 6 or 7 to the + terminal of the tweeter:
– just use one of the terminals 5, 6 or 7
– start with terminal 6 for the first setup
– use terminal 5 to
– start with terminal 6 for the first setup
– use terminal 5 to
increase
the sound pressure level by 2 dB
– use terminal 7 to
decrease
the sound pressure level by 2 dB
X Connect terminal 8 to the – terminal of the tweeter.
3. To connect the power amplifier
X Connect terminal 1 to the + terminal of the power amplifier.
X Connect terminal 2 to the – terminal of the power amplifier.
X Connect terminal 2 to the – terminal of the power amplifier.