Fusion EN-SW100 Leaflet

SUBWOOFERS

EN-SW100, EN-SW120, EN-SW150

Installation Guidelines
Ensure the audio system is turned off before making any connections to the amplifier, subwoofer or source unit. 
Failure to do so could result in permanent damage to the audio system.

When wiring the subwoofer ensure that the wire is protected from sharp objects and always use rubber grommets 
when wiring through metal panels. Ensure all terminals and connections are protected from the vehicle chassis and 
from each other as failure to do so could result in permanent damage to the audio system.

When connecting the amplifier and subwoofer ensure you connect the positive and negative output wire from the 
amplifier to the corresponding subwoofer terminals. 

1) Ensure there is adequate clearance and depth for the subwoofer to be mounted 
2) Use the supplied ruler to mark out and cut the correct diameter hole
3) Drill the holes for the mounting screws 
4) Insert the subwoofer and affix with the appropriate screws (not included)

 

300 Watts

400 Watts

500 Watts

150 Watts

200 Watts

250 Watts

24Hz - 3.5kHz

21Hz - 3kHz

20Hz - 2.5kHz

4 Ohms

4 Ohms

4 Ohms

88 dB

89 dB

90 dB

120mm (4-

3/4

”)

136mm (5-

3/8

”)

153mm (6”)

226mm (8 - 

7/8”)

275mm (10-

13/16”)

349mm (13 - 

3/4”)

28.5

48.28

91.28

1.008

1.705

3.223

76.2mm / 3"

76.2mm / 3"

101.6mm / 4"

255mm / 10"

225.3mm / 8 - 

9 /10

"

242.5mm / 9 - 

1/2

"

41.6

33.0

34.2

15.71

28.58

85.53

0.56

1.009

3.02

69.9

53.9

44.4