JL Audio SB-N-ARMAD/10W6v2/GA User Manual

➔

➔

STEP 13(B): You can use different cutting tools.
Here we used a cutting wheel.

STEP 15: Back inside the SUV, Look into the area that the Stealthbox is going to
reside.There is a metal lip to the left. On this lip there is an exposed hole. Measure 3/4”
from the middle of this hole down and mark.

Continued on Next Page ➔

➔

STEP 14: Use a sanding wheel or just sand paper
to clean off the edge off the cut.

STEP 16: There is a metal lip to the right. On this lip there is also an exposed hole.
Measure 1-1/4” from the middle of this hole downward and mark.

S B - N - A R M DA / 1 0 W 6 v 2 ,   J L   AU D I O,   I n c   2 0 0 5

S h e e t   S K U # 0 1 1 1 9 3     R ev i s i o n   5 / 2 6 / 2 0 0 5

➔

Before drilling, make sure that you are not going to
be drilling into any electrical wiring or anything else
that might cause a reduction in your weekly pay.

Always wear eye protection when drilling.

With the use of a 1/2” drill bit and drill. Drill at the
marks from STEPs 14 & 15.

➔

3/4”

1-1/4”