JL Audio SB-N-PTHFNDR/10W0 User Manual
Sheet SKU#011134 Revision 9/21/00
SB-N-PTHFNDR/10WØ, JL AUDIO, Inc 2000 • Page 1
SB-N-PTHFNDR/10WØ Stealthbox™
Fits 1996 - 1999 Nissan Pathfinder
and Infiniti QX4
Installation Guide:
This Stealthbox is a product which requires professional installation skills and tools. Please read this
installation guide thoroughly before beginning the project. It will guide you step by step through the
installation. Several of the steps in this process may require two people to accomplish.
installation guide thoroughly before beginning the project. It will guide you step by step through the
installation. Several of the steps in this process may require two people to accomplish.
It is absolutely vital that the enclosure be properly mounted to the vehicle according to these instruc-
tions. Failure to mount the enclosure properly presents two problems: 1) The sub-bass performance
will suffer due to the movement of the enclosure caused by the force exerted by the woofer and 2) A
loose enclosure presents a serious safety hazard in the event of a collision or sudden deceleration.
tions. Failure to mount the enclosure properly presents two problems: 1) The sub-bass performance
will suffer due to the movement of the enclosure caused by the force exerted by the woofer and 2) A
loose enclosure presents a serious safety hazard in the event of a collision or sudden deceleration.
STEP 1: In the hatch area, pull up the carpet from the floor on
the driver side to expose the padding underneath.
the driver side to expose the padding underneath.
STEP 2: Place the Stealthbox in its mounting position.
STEP 3: Cut the padding along the edge of the Stealthbox.
After final installation, the Stealthbox should sit only on a layer
of carpet so that it more easily couples to the body of the
vehicle.
After final installation, the Stealthbox should sit only on a layer
of carpet so that it more easily couples to the body of the
vehicle.
STEP 4: Remove the Stealthbox from the vehicle, then remove
the padding that was cut off in the previous step.
the padding that was cut off in the previous step.
STEP 5: Adjust the cargo hook so that it is pushed forward. If
this step is neglected the Stealthbox may not fit properly and
the hook will be unusable.
this step is neglected the Stealthbox may not fit properly and
the hook will be unusable.