JL Audio SB-H-S2000/10W3 User Manual
Sheet SKU#011155 Revision 10/5/01
SB-H-S2000/10W3, JL AUDIO, Inc 2001 • Page 2
STEP 5: Locate holes from inside the trunk. Using a carpet
knife, cut holes into the carpet.
knife, cut holes into the carpet.
STEP 6: Connect the speaker wire and place the Stealthbox in
the well, making sure that no speaker wire is trapped under the
enclosure. Test the enclosure at this point.
the well, making sure that no speaker wire is trapped under the
enclosure. Test the enclosure at this point.
STEP 7: From underneath the car, insert two 3/8" bolt, lock
washer, fender washer through the hole in the sheet metal into
the threaded insert molded into the Stealthbox. Before tighting
place a generous bead of silicone sealant between the fender
washer and the sheet metal of the car, to prevent moisture from
entering trunk.
washer, fender washer through the hole in the sheet metal into
the threaded insert molded into the Stealthbox. Before tighting
place a generous bead of silicone sealant between the fender
washer and the sheet metal of the car, to prevent moisture from
entering trunk.
3/8" Bolt
Lock Washer
Flat Washer
Vehicle's Sheet Me
Enclosure Wall (fiberglass)
Threaded Insert
Molded into
Enclosure
Molded into
Enclosure
Bead of Silicone Sealant