JL Audio SB-N-MURAN/10W1v2 User Manual

Page of 3
Stealthbox
®
I N S T A L L A T I O N   G U I D E
S B - N - M U R A N / 1 0 W 1 v 2 ,   J L   AU D I O,   I n c   2 0 0 6
S h e e t   S K U # 0 1 1 1 9 7     R ev i s i o n 1 / 1 8 / 2 0 0 6  
Pa g e  1
for the
SB-N-MURAN/10W1v2
(2003-Up Nissan Murano)
This Stealthbox is a product which
requires professional installation skills and
tools.
Please read this installation guide thor-
oughly before beginning the project. It
will guide you step by step through the
installation. Several of the steps in this
process may require two people to
accomplish.
It is absolutely vital that the enclosure
be properly mounted to the vehicle
according to these instructions. Failure
to mount the enclosure properly pres-
ents two problems: 1) The sub-bass
performance will suffer due to the
movement of the enclosure caused by
the force exerted by the woofer(s) and
2) A loose enclosure presents a serious
safety hazard in the event of a collision
or sudden deceleration.
Please enjoy your JL Audio Stealthbox
responsibly.
STEP 1: Remove all contents, rubber flooring,
cargo shade and lower the rear seats.
STEP 2: Open the cargo flooring and hook it
to the upper lip of the tailgate opening.
Remove the organizer tray, wooden board,
factory woofer enclosure, spare tire and the
driver’s side cargo pocket cover.
STEP 3: a)With a Phillips® screw driver,
remove the driver’s side cargo pocket.
b)Unsnap the wiring harness that is running
from front to back, on the floor.
STEP 4: This picture is looking from the back-
seats to the tailgate opening, showing the tail-
gate sill plate.
To remove the sill plate; Pop out the middle of
these three tabs and then pull out the outer
piece from the sill plate.
STEP 5: With a small flat blade; pop out the
oval plastic cover of the tailgate sill plate, that
is located under the tailgate hook latch.
The sill plate now can be lifted up and
removed out of the vehicle.
STEP 6: Look to the front left of the cargo
area for the two factory bolts that are secur-
ing a black plate to the floor.
Remove the left side bolt only.
START 
HERE
Continued on Next Page 
w w w . j l a u d i o . c o m