Sony SA-NS310 User Manual
15
GB
G
e
ttin
g
g
S
ta
ta
rte
d
Bottom
For details on each indicator, see “Indicator information” (page 47).
K NETWORK STANDBY / STANDBY
L WPS button
Use to make the network settings for the
WPS push button configuration (page 23).
WPS push button configuration (page 23).
M UPDATE button, indicator
Press to start updating the software of the
unit (page 36).
unit (page 36).
Indicates the update status of the unit.
Green (lit): The unit can be updated.
Green (flashing): The unit is updating.
Red (flashing): An error has occurred.
Not lit: The unit does not need updating.
Green (lit): The unit can be updated.
Green (flashing): The unit is updating.
Red (flashing): An error has occurred.
Not lit: The unit does not need updating.
N ALL RESET button
Press and hold until all indicators light
while the unit is being turned on and reset
to its factory default settings.
Use a thin object, such as a small pin.
The previously registered settings or
information will be reset.
while the unit is being turned on and reset
to its factory default settings.
Use a thin object, such as a small pin.
The previously registered settings or
information will be reset.
Note
Network settings are also reset when you
press ALL RESET button.
Network settings are also reset when you
press ALL RESET button.