Samson D1500 User Manual

9

In larger rooms two or more Auro subwoofers can be used in stereo. For additional low-end, you can 
daisy chain a pair of Auro subwoofers to each side of your speaker system using the parallel THRU 
outputs. 
To create a stereo full range audio system, two Auro Subwoofers can be used with any pair of powered 
full range enclosures. Follow these steps below for a system set-up using two D1200 or D1500 
subwfooers with a mixer and a pair of powered satellite loudspeakers. 
•  Lower your mixer’s master outputs until they are 

turned off. 

•  Connect the mixer’s left output to the left side 

Auro subwoofer LINE INPUT A, and the mixer’s 
right output to the right side LINE INPUT B.

•  If using the Auro D1200, connect the THRU 

A output to the line input of the left powered 
satellite, and the THRU B output to the line 
input of the right satellite. For the Auro D1500 
connect HIGH PASS A output to the line input 
of the left powered satellite and the HIGH PASS 
B output to the line input of the right powered 
satellite.

•  Set the level of your powered satellites up to 

normal operating level. Run an audio signal 
(such as music from a MP3 player) through 
your mixer, and raise the level to a comfortable 
listening volume. 

•  Slowly raise the Auro subwoofer LEVEL controls 

and adjust the two subwoofers to the desired 
level of low frequency output. 

•  When you raise and lower your mixer’s output, 

the two Auro subwoofers and satellites will track 
at the same relative volume.