ONKYO CS-245 User Manual

En-

17

Press the [ ON/STANDBY] button.

Alternatively, press the remote controller’s [] button.

The CD receiver comes on, and the display lights up.

If an iPod/iPhone is connected to the CD receiver, the 
“Connecting” message will be shown and the 
iPod/iPhone will be charged. Even if the CD receiver is 
in standby mode, the “Charging” message will be shown 
and charging will occur.

You can select CD, iPod (USB), FM, or LINE, which can 
be an external component.

To select the input source, use the remote controller’s 
Input Selector buttons. On the CD receiver, press the 
[INPUT] button repeatedly.

The input sources are selected in the following order.

You can also use the remote controller’s VOLUME 
[–]/[+] buttons.

You can temporarily mute the output of the CD receiver.

The CD receiver is muted.

“Muting” appears on the display for a few seconds. The 
MUTING indicator flashes continuously while the CD 
receiver is muted.

To unmute the receiver, press the [MUTING] button 
again.

Notes:
• Press the VOLUME [–]/[+] buttons on the CD 

receiver or pressing the VOLUME [–]/[+] buttons on 
the remote controller will unmute the CD receiver.

• If you turn the CD receiver off, the next time you turn 

it on, the CD receiver will be unmuted.

You can connect a pair of stereo headphones (ø3.5 mm, 
1/8-inch phone plug) to the receiver’s headphones [] 
jack for private listening.

Notes:
• Always turn down the volume before connecting your 

headphones.

• While the headphones plug is inserted in the 

headphones [] jack, the speakers are turned off.

M ON/STANDBY

*

M

FM

 iPod (USB)

LINE

CD