Novatel DL-V3 User Manual
DL-V3 User Manual Rev 3
139
B.39 SITEUPDATEANTHEIGHT
Set Occupied Site Height
The siteupdateantheight command allows you to configure the site antenna height information
(AntHeight field in the sitedef log) once the site has been occupied (by issuing a site enter
command).
(AntHeight field in the sitedef log) once the site has been occupied (by issuing a site enter
command).
The siteupdateantheight set command sets the site antenna height for an occupied site to antheight.
The siteupdateantheight default and the siteupdateantheight clear commands clear the site antenna
height for an occupied site.
height for an occupied site.
Syntax
siteupdateantheight set [antheight]
siteupdateantheight default|clear
Message ID = 167
Table 60: SITEUPDATEANTHEIGHT Default Configuration
Field
Data
Value Used if
Not Specified
Bytes
Format
Units
Offset
1
Header
-
-
-
0
2
Parameter Update, see
Table 34 on Page 107
Table 34 on Page 107
-
4
Enum
none
H
3
Antenna height
0
4
Float
none
H+4
4
Reserved for future use
NUL
12
Char[]
none
H+8
Parameter
Power-On
Freset
Stored in NVM
AntHeight
clear
clear
NO