Panasonic ET5K series User Manual

 

  [WPS(Push button)]
 1.  Press the WPS button on the access point until the light flashes
 2.  Connect the TV with the access point

 

1) Please press the 'WPS' button on the wireless 

access point until its light flashes.

2) When the light is flashing select ‘Connect’ on 

TV.

If you are unsure, please check the instruction 

manual of the wireless access point.

 Connect

 

● 

 Ensure that your access point supports WPS for this setup.

● 

 WPS: Wi-Fi Protected Setup™

● 

 If the connection has failed, check the settings and positions of 
your access point. And then, follow the on-screen instructions.

 3.  After the access point setting is finished, perform the connection test

 

 

 

 Check wireless network connection.
 Check acquired IP address.
 Check for devices using same IP address.
 Check gateway connection.
 Check server connection.

 The test is successful and the TV is connected to the 
network.

 Check the settings and connections. And then select 
[Retry].

 4.  Go to the next step 

 

 (Press twice)

 

 Select [Home] viewing environment to use in your home environment.

 Home

 Shop

   select
   set

 [Shop] viewing environment is the demonstration mode to explain main features of this TV.

● 

 You can return to viewing environment selection screen at the stage of Shop confirmation screen.

 

 Home

 Shop

 

   select
   set

 

 You have selected shop mode

 

 To change viewing environment later on, you will need to initialise all settings by accessing Shipping 
Condition.   [Shipping Condition] (p. 43)

 If tuning has failed, check the connection of the RF cable, and then, follow the on-screen instructions.

● 

 To edit or hide (skip) channels   “Tuning and Editing Channels” (p. 39 - 41)

● 

 To retune all channels   [Auto Tuning] in “Tuning and Editing Channels” (p. 40, 41)

● 

 To initialise all settings   [Shipping Condition] (p. 43)