Panasonic ET5K series User Manual

Displaying PC Screen on TV

The screen of the PC connected to the TV can be displayed on the TV.
You can also listen to PC sound with the audio cable connected.

●

To connect PC (p. 74)

Select the external input

Select [PC]

Input Selection

AV2

AV1

SD Card/USB

HDMI4

HDMI3

HDMI2

HDMI1

select

access

●

Corresponding signals (p. 84)

●

If [H-freq.] or [V-freq.] is shown in red, the signals may not be supported.

PC menu setting

●

To make settings “How to Use Menu Functions” (p. 32)

Menu

Item

Adjustments / Configurations (alternatives)

Setup

PC Setup

Input Resolution

Switches to a wide view:
VGA (640 × 480 pixels) / WVGA (852 × 480 pixels) / XGA (1,024 × 768 pixels) /
WXGA (1,280 × 768 pixels, 1,366 × 768 pixels)

●

Options change depending on signals

Clock

Set to the minimum level if noise occurs

H-pos

Adjusts horizontal position

V-pos

Adjusts vertical position

Clock Phase

Eliminates flicker and distortion

●

Adjust after Clock adjustment

●

Set to the minimum level if noise occurs

Sync

Chooses another synchronous signal if the image is distorted
[H & V] / [On Green]
[H & V]: by the horizontal and vertical signals from your PC
[On Green]: by the green signal from your PC (if available)

Reset to Defaults

Press the OK button to reset [PC Setup] to the default settings

●

Other items (p. 33 - 38, 45)

Note

●

For HDMI-compatible PC, possible to connect to HDMI terminals (HDMI1 / HDMI2 / HDMI3 / HDMI4) by using HDMI
cable (p. 82).

●
●